diameters
美 [daɪˈæmətər] 
英 [daɪˈæmɪtə(r)]
词形变化
复数：diameters 同义词
英汉解释
英英解释
例句
Spot diameters of just a few thousands of an inch can readily be attained with convenient short focal length lenses.
用普通的短焦距透镜不难得到直径只有几十微米的光点。
The BET areas, pore volumes and average pore diameters of the two organo-bentonites were decreased as compared to that of Na-bentonite.
有机改性膨润土的比表面积、孔隙体积和平均孔径相比钠化膨润土均有所降低。
So we're going to get a list here of the diameters of the ball bearings, and the diameters is in inches.
我将列出这些，滚珠的直径，以英尺作为单位。
The numbers of young trees average length of different branches, numbers of root and biomass increased as the basal diameters increased.
白榆天然下种更新幼树分枝数量、各级枝平均长度、各部分生物量也随地径的增大而增多。
Prototype electron emitters have been developed with diameters of a few nanometers.
电子发射管的样品已经开发出来，其直径只有几纳米。
The metering rod either has two or more steps of different diameters or is tapered at its lower end .
量油杆可以有两个或更多个不同直径的台阶，或在它的下端被逐渐削成锥形。
The size of a pancake is given by the pancake's diameter. All pancakes in a stack have different diameters.
给定煎饼的半径作为其尺寸，一叠煎饼的大小各不相同。
It's found that successful two-phase pulse detonations can be achieved in tubes with diameters less than cell size of mixtures.
研究发现，在内径小于混合物胞格尺寸的爆震管内，可以形成充分发展的两相脉冲爆震波。
Among them, the inlet and outlet throttle hole diameters of the control volume are the key for the better injection performance.
其中，控制室进出口节流孔孔径的合理匹配和组合对获得良好的喷油特性尤为关键；
A certain volume of ink samples for the set pressure, some time, the expanded into cylinder diameters that represents the size, in mm.
一定体积的油墨样品在规定压力下，经一定时间，所扩展成圆柱体直径大小，以毫米表示之。
the machine can also be used for the precision direct seeding of other spherical seeds with small particle diameters.
本机亦可用于其它球型小粒径种子的精量直播。
Some of Autonomous Underwater Vehicles (AUV) has small transverse scales, which are the same dimensional level as their propeller diameters.
某些水下机器人横向尺度较小，往往与其主推螺旋桨直径处于同一量级；
The explicit relation of the fixed constant to the diameters of the finite elements and the number of processors was also provided.
并且显式给出该常数与有限元网格直径和处理机台数的关系。
For the LMA multimode fiber used in the experiment, losses of different modes are calculated theoretically under various bending diameters.
另外，对于实验所采用的大模场面积多模光纤，理论计算了各模式损耗与光纤弯曲直径的关系。；
Note: Preferred mounting of check valves of any manufacturer is 5 pipe diameters downstream from the pump discharge or pipe elbow.
注释：任何制造商的止回阀最好安装在泵排泄口或管道弯头下游5倍管道直径的位置。
The table provides a recommended operating speed and a maximum safe speed for a range of blade diameters .
推荐表提供了安全运行速度和最高车速一系列叶片直径。
At least a 30% decrease in the sum of diameters of target lesions, taking as reference the baseline sum diameters.
所有靶病灶的长径总和缩小30%或以上。
The Minnan people also built some of the largest tulou, with diameters of nearly a tenth of a mile.
一些比较大的土楼也是由闽南人建的，直径大概有160米左右。
within both of these categories , the abutments are available in different lengths , diameters , angulations and post diameters.
在这两种类都有不同长度、直径、角度、以及栓柱直径。
All three alloys are available with no- clean , water washable or rosin systems and can be drawn down to the finest wire diameters .
三种合金全都具有免清洗、可水洗或松香配系，并能拉制成极为纤细的线径。
Spot diameters of just a few thousands of an inch can readily be attained with convenient short focal length lenses.
用普通的短焦距透镜不难得到直径只有几十微米的光点。
Measuring the thread diameters to see if they meet the specifications.
检查螺丝或螺帽之牙径规格是否符合规格。
SYMBOLIC REPRESENTATION ON DRAWINGS OF RIVET DIAMETERS MADE OF ALUMINIUM ALLOYS.
铝合金铆钉直径图形符号的表示
A machine vision system for inspection of inner and outer diameters of bearings was developed for a pipeline production and inspection.
开发了适应大批量流水线生产和检测需要的轴承内外径机器视觉检测系统。
This simple pipe clamp loads pipe sections of various diameters into a machine chuck.
我们的这款简单的管夹，可以装载不同口径的管路在一个机械管盘中。
The effect of measurement cylinders diameters on the measuring result of the gears M Value is analysed.
分析了圆柱直径的大小对齿轮M值测量结果的影响。
The upper staple supporting surface supports staples of different wire diameters in an upright position.
所述上侧钉支撑表面将具有不同丝径的钉支撑在直立位置。
The adjusting rods can be also slantwise arranged on the supporting rods to adapt to the needs of placing trays having different diameters.
且调节杆还可以斜置于支撑杆上，以适应放置多种不同直径的盘碟。
SHIPBUILDING. FLEXIBLE PIPING. GENERAL TABLE. DIAMETERS. MATERIALS. TYPES OF JOINT. APPLICATIONS. PRESSURES.
造船工业.软管.使用总表.直径.材料.接合型.用途.压力
The tolerances for the bore and outside diameters of rolling bearings are internationally standardized , see section " Tolerances " .
滚动轴承的内径与外径公差已经国际标准化，见“公差”一节。
The sensor consists of two LPG sections exciting different order cladding modes and having different cladding diameters.
该传感器由两段LPG组成，两段LPG所激发的包层模阶数不同，且两段LPG的包层直径也不同。
Dimensions process thread, stem length and diameters can be arranged flexibly matching into your application.
尺寸、加工螺纹、杆长和直径都可以根据您的应用灵活调整。
The diameters, lengths and densities of the nanorods could be controlled by changing the experiment conditions.
同时藉由改变实验条件进行奈米柱长度、直径和密度的控制。
The baiting unit for a steel pipe bend is suitable for the steel pipe bends with various angles and pipe diameters.
它适用于做各种角度和各种管径的钢管弯头。
At the center of the square, the plain obelisk, flanked by two fountains, stands at the crossing of the two diameters of the ellipse.
在中心广场，平原方尖碑，两侧两个喷泉，站在跨越两个直径椭圆。
Two color choices in the 7mm and 8mm diameters allow you to use a separate color for each length Prusik in a Tandem Prusik Belay System.
两种颜色选择在7毫米和8毫米直径方面的允许你使用分开每种颜色长度于Prusik在串联Prusik稳固点系统。
Formerly, the terms extra-light, light, medium and heavy were applied to the diameters, and narrow and wide to the width dimensions.
过去，特轻型、轻型、中型和重型被用于宽或窄的共轭直径上面。
The adapters enable probes with different diameters to be properly positoned in the wobbulator or spindle micrometer mounting clamps.
适配器使不同直径的探头都能适当地安装在摆频振荡器或轴式千分尺的夹具上。
In such a way, internal turning of exceptionally small holes, i. e. , holes having diameters of down to 12 to 6 mm, is allowed.
按照这种方法，就允许对特别小的孔即具有的直径小至12到6毫米的孔进行内部车削。
Tubing Size. In general, the pressure drop is seen to be over predicted for a range of tubing diameters between 1 and 3 inches.
管材的尺寸。一般来说，其压力损失预测可以看到在为一系列油管材的尺寸。管直径1到3英寸。
On turning different materials and works of different diameters, lathes must be run at different speeds.
在切削不同的直径不同的材料和工作时，车床必须以不同的速度加工。
