keyway
美 
英 ['kiːweɪ]
词形变化
复数：keyways
英汉解释
英英解释
例句
The system includes the electronic cylinder that has no keyway to pick and the electronic key that cannot be duplicated.
此系统包含电子柱体，电子柱体没有锁眼，所以不能被复配。
Different specifications of the keyway is made up of different cemented carbide milling tool specifications out of a one-time processing.
不同规格的键槽是由不同规格的硬质合金铣刀具一次性加工出来的。
Lastly during assembly care is taken to avoid damaging the seals when passing over the keyway or performing bearing surfaces of the shaft.
最后，在组装过程中，当部件通过键槽时，注意避免损坏密封和轴的轴颈表面。
This particular failure was accelerated by the sharp corners that had been cut in the shaft's rectangular keyway.
这个出格地掉败是加快由急弯时说，已被削减，在轴地矩形键槽。
rod - ends with self - lubricating spherical bearing . long threaded shank without keyway . dimensions and loads.
带自润滑装置的球形接头。无键槽长螺纹杆。尺寸和载荷。
Group fixture can use different size specifications keyway positioning and clamping workpieces.
利用成组夹具可以实现不同规格键槽尺寸工件的定位与夹紧。
rod - ends with self - lubricating spherical bearing . long threaded shank and keyway . dimensions and loads.
带自润滑装置的球形接头。有键槽长螺纹杆。尺寸和载荷。
Improvement is made to the positioning feller gauge in flywheel keyway broaching machine by V-type auto center align.
利用V型块自动对中定位原理，对飞轮键槽拉床定位塞尺进行改进。
A lock assembly includes a lock body and a keyway covering member.
一种锁具组件包括锁具本体和钥孔覆盖部件。
For other large-scale structure of the processing within the keyway, the plane has a certain reference.
对于，其他大型结构件的内键槽的加工，该专机具有一定的借鉴意义。
ROD-ENDS WITH SELF-ALIGNING BALL BEARINGS. LONG THREADED SHANK WITHOUT KEYWAY. DIMENSIONS AND LOADS.
滚珠球形接头。无纵向槽的长螺纹杆。尺寸和负荷。
This paper designed a suit of tool which measures azimuth request between inner hole keyway and gear tooth?
设计了一套简单易操作的孔内键槽与齿有方位要求的量具。
ROD-ENDS WITH SELF-ALIGNING BALL BEARINGS. LONG THREADED SHANK AND KEYWAY. DIMENSIONS AND LOADS.
滚珠球形接头.有纵向槽的长螺纹杆.尺寸和负荷
The lock body includes a keyway disposed on an outer surface.
该锁具本体包括置于外表面上的钥孔。
You can also use a standard tension wrench or small screwdriver and place it at the center of the keyway .
你也可以用一个小螺丝标准或紧张扳手摆在中心的键槽。
The stress in floor plate with keyway are more than it with straight seam under the same level of uplift pressure.
同级扬压力作用下，带键槽底板块的应力大于直缝底板块的应力；
Jaws: Hardened alloy steel with lubrication, keyway slot for tooling location, 32 degree jaw motion Each jaw travels 1 degree beyond center.
大白鲨：硬化合金钢与润滑，键槽插槽工具的位置，32度下颌运动每超出1颚旅游中心的程度。
Keyway slot for tooling location.
键槽插槽工具的位置。
In all FiberBench Coupling Systems using OFR PM FiberCables, both the fast axis and the FC receptacle keyway are vertical.
所有的光纤工作台耦合系统都使用OFRPM光纤电缆，快轴和FC容器键槽都是竖直的。
Improvement for Positioning Feller Gauge in Flywheel Keyway Broaching Machine
飞轮键槽拉床定位塞尺的改进
The measurement and calculation on double keyway symmetry examinations
双键槽对称度误差的测量与计算
The design and apply of a lathe work holder for milling keyway
车床铣削键槽工装设计及应用
Technical specifications for keyway broaches
键槽拉刀通用技术条件
Re-Dissertation on Measurement and Calculation of Single Keyway Symmetry Error
再论单键键槽对称度误差的检测与计算
Machining Keyway of Under Oil Electric Pump Impeller with HOmemade Pushing Broach
自制推刀工潜油电泵叶轮键槽
Machining Keyway with a Center Lathe
在普通车床上加工键槽
The jig and cutter positioning method of the processing keyway on shifts
轴类零件的键槽加工夹具及对刀方法
Design of measurer for azimuth request between hole keyway and gear tooth
孔内键槽与齿有方位要求的量具设计
The improved design of keyway for the large diameter gear
大直径齿轮键槽的改进设计
Lathe for Milling Female Keyway of Large-scale Structure Part
大型结构件孔内键槽铣削专用机床研制
Widened flat body keyway broach types and dimensions
加宽平刀体键槽拉刀型式与尺寸
Keyway broach with chamfer types and dimensions
带倒角齿键槽拉刀型式与尺寸
Fix Position and Adjusting a Cutter of Keyway Producing
键槽加工的定位与对刀
A Porcessing Technique for Deep Hole and Long Keyway with High Precision Using Slotting
基于插削实现高精度深内孔长键槽的加工方法
Error Analysis of Long Keyway in Machining Process
长键槽在加工过程中的误差分析
Keyway milling cutters with morse taper shank
产品名称：莫氏锥柄键槽铣刀
Broaching Positioner Of Gear Keyway
齿轮键槽拉削胎具
Study on Ultrasonic Test of Turbine Vane Wheel Keyway
汽轮机叶轮键槽模拟裂纹超声波检测
Broaching device for equal-deep keyway in taper hole
锥孔内等深键槽拉削装置
Keyway and Key Slot Dimensions Metric
键槽和键槽的尺寸度量
