work-hardening

work-hardening

美 　英

• un.冷加工硬化
• 网络功硬化；变形硬化；负偏离

词形变化

过去分词：work-hardened  现在分词：work-hardening  第三人称单数：work-hardens  

英汉解释

v.	1. to increase the hardness or strength of a metal by subjecting it to compression, tension, or another mechanical process

例句

Furthermore, the work hardening capacity, bake-hardening properties and anti-hollow capacity of high strength steel are researched as well.

对高强度钢板的强化机制进行分析，根据其强化机理可以更好的预测其成形性能并指导实际生产；

Due to work hardening in the groove area, ductile materials and tempers should be specified.

由于需要对凹槽进行硬化，所以需要指定塑性材料和回火。

The cold work hardening is affected by both the recovery and recrystallization after cold work and by the solid solution temperature.

合金冷作硬化效果与合金的回复和再结晶程度及固溶处理温度有关。

Work-hardening near the blind hole is caused by hole chilling when residual stresses are measured by the blind hole method.

盲孔法测量残余应力时，钻孔会在盲孔附近产生加工硬化。

When work-hardening exponent of tube material get bigger, the formability of the tube is better.

管坯材料的加工硬化指数越大，材料的成形性能越好。

The results show that the work hardening rate of pure tantalum is low.

研究结果表明：纯钽的宏观加工硬化速率比较低。

The stress increased slowly with strain increased when strain was above 5%, and work hardening rate decreased.

当应变量大于5%时，应力随着应变的增加而缓慢增加，加工硬化速率降低。

heated. or welded without such complications as work hardening.

加热。或者焊接，这种方法没有加工硬化的问题。

or welded without such complications as work hardening.

没有这样的并发症或焊接工作硬化。

what is the effect of work hardening phenomenon on metallic material?

金属材料的加工硬化现象对金属材料的力学性能有何影响？。

Effect of cold work hardening on stress corrosion cracking of stainless steels in primary water of pressurized water reactors

冷加工硬化对压水堆一回路水中不锈钢应力腐蚀裂纹的影响

Effect of Nitrogen, Carbon and Manganese on Work-Hardening Ability of Metastable Austenite Manganese Steel

氮碳锰对介稳奥氏体锰钢加工硬化性能的影响

work hardening precipitation hardening strain aging quench aging sensitizention

加工硬化沉淀硬化应变实效淬火实效敏化

The influence of machining processes of fastening holes on surface work hardening

紧固孔的加工工艺对其表面硬化的影响

Experiment and Study on Cold Work Hardening to Increase the Permanence Limit of Mechanism

表面硬化处理对提高构件持久极限的试验研究

Stress distribution near tip of shallow notch for power-work-hardening material

幂硬化材料浅切口根部附近的应力分布

On the effects of specimen recycling to the tensile strength and work hardening

试样复用对拉伸强度和被粘物加工硬化的影响

Research on the Ability of Work Hardening of High Manganese Steel at the Condition of Simulating Actual Work

模拟实际工况条件下高锰钢加工硬化能力的研究

Work hardening rate and microstructure of tantalum

钽的加工硬化速率及其显微组织

The Research on Surface Work - hardening in High Speed Lapping

高速研磨表面加工硬化的研究

Work Hardening Ability of As-cast Manganese Steel

铸态锰钢的加工硬化性能

Simulation of Surface Work-Hardening Caused by Metal Cutting

金属切削中工件表层加工硬化模拟