deformation

deformation

美 [ˌdefərˈmeɪʃ(ə)n]  英 [ˌdiːfɔː(r)ˈmeɪʃ(ə)n]

  • n.变形;畸形;损形;破相
  • 网络形变;变态;变形症

词形变化

复数:deformations  

同义词

英汉双解

n.
1.
[u]
损形;变形;畸形the process or result of changing and spoiling the normal shape of sth
2.
[c]
破相;变丑;残废a change in the normal shape of sth as a result of injury or illness
a deformation of the spine
脊柱的畸变

英汉解释

n.
1.
【物】(形体的)损伤;改丑;

英英解释

n.

例句

In the function of injection pressure, the mould which has core will produce a little core offset and cause plastics deformation.

具有模具注射压力作用使产生一定偏移引起变形

For stainless steel, high speed steel, vanadium steel, high hardness, toughness and deformation, easy to burn the workpiece grinding.

适用不锈钢硬度韧性变形烧伤工件磨削加工

Rubberand version there are easy to deformation and cracking defect as a result, not suitable for making a fine product.

橡皮活命便当变形龟裂弊病因此不宜产物

And you will see after a while that you get permanent deformation, then it no longer comes back to its original length.

看到不久发生永久变形不会回到

And the surface deformation is continual and slow with a long duration of movement due to deep mining of iron ore in soft rock strata.

地层深部铁矿开采引起地表移动变形发展缓慢周期

Increased loading, pipes easy to corrode, leakage and pipe rupture easily increase, easy to expanse and easily cause ground deformation.

增加承重排管腐蚀增加漏水管材破裂现象膨胀造成地面变形

Plug is one of the key deformation tools in cross piercing. Its function is turning a solid bar into a hollow bloom.

顶头穿孔主要变形工具之一作用实心穿一定空心

The design of tall building is often controlled by its deformation .

高层建筑结构设计往往变形控制

Although steel is usually unfirable, it intends to deformation and fracture owing to its high thermal conductivity when exposed to fire.

钢材虽然具备可燃性但是钢材导热系数一旦发生火灾产生结构变形破坏

By comparing the load of compression deformation and that of compression buckling deformation, the critical relative thickness is derived.

通过比较压缩变形载荷压缩失稳变形载荷大小导出临界相对厚度

Deformation, division, fuzzy, "abstract" image is in this day and age of human psychological state of specific visual symbol.

变形分裂模糊、“抽象形象正是处于这个时代人类心理状态具体可视象征

However, due to the poor stiffness, thin-walled parts are easy to deformation in machining.

但是由于薄壁刚性较差加工过程容易发生变形

The results show that, in the shoulder deformation zone, the fine grain is similar to that of the center of friction stir zone.

结果表明搅拌摩擦中心晶粒尺寸变形相似晶粒比较细小

The preliminary suggestion about adjusting deformation result of the equivalent model is provided for a reference in engineering design.

建议等效混凝土模型变形结果进行修正初步修正系数工程设计参考

The risk point was observed through the stress and deformation. Every point at all levels under the wind with no wind load are compared.

根据应力变形情况观察危险各级作用结果载荷进行比较得出结论

This kind of fly line may also be a sort of new deformation form at explosive load in metal.

这种线可能爆炸载荷金属出现一种特殊塑性变形机制

The elastic deformation of drawing die is an important factor which can affect the accuracy, but it is often neglected in draw forming.

拉拔模弹性变形影响拉拔精度重要因素往往成形忽略

2 products relatively easy to breakage, deformation, please do not use too much force.

产品比较容易破损变形不要用力使用

A method is provided, with which the mean pure deformation resistance is calculated by means of the specific pure deformation energy.

提高变形预测精度提出一种基于混合最小支持向量数学模型组合方法

steel cages stacked venue is not formed, easy to make steel cage deformation occurred.

钢筋堆放场地平整容易使钢筋发生弯曲变形

Only for values between 0. 6 and 1. 0 is the mode of deformation in doubt.

只有0.61之间变形模式才是确定

There is no "island structure" will not be able to exert the existence of resin-based Deformation energy potential.

没有海岛结构”,无法发挥树脂存在变形能源潜力

read in after piling up to pressure when xiao hai, so as not to cause a heap of spine of deformation on the subject, compression.

书册堆放底下垫板以免导致书脊变形

Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions.

制品表面垂直方向变形特性制品.交货技术条件

When transporting the mattress to avoid excessive deformation, do not bend or fold the mattress, do not directly tied with a rope hard.

搬运避免使床垫过度变形不要床垫弯曲折叠不要直接绳索使劲捆绑

The result shows that the deformation of the bunch and the formation of beam halo also take place in a cyclotron.

模拟结果表明形变现象同样发生回旋加速器不过产生机制不同直线加速器

A quantum group is a deformation of a given classical group, and is such that no classical space can have it as a symmetry group.

量子已知经典变形所有经典无法作为对称

has been used to measure the deformation of internal combustion engine connecting rod in this paper.

本文光束激光干涉测量内燃机连杆变形

Method of nonlinear element has been used to the research on large deformation of rubber like material.

研究非线性有限方法橡胶材料应用

Conventional method can only approximately describe the relationship of the deformation and its impacting factors.

传统方法只能近似描述变形影响因子之间关系

It was shown that the creep deformation of the dam body and foundation was on a small level and tended to be stable.

通过流变计算得出坝基流变变形较小而且基本趋于稳定结论

Box of high quality stainless steel, does not rust, clean, hair rollers is not easy deformation, rolling brush made of nylon cord, durable.

箱体采用优质不锈钢材质锈蚀清洁卫生不易变形采用尼龙线绳轧制经久耐用

The change at the elastic limit from elastic to plastic deformation is referred to as the yield point or yield strength.

弹性极限范围弹性变形塑性变化叫作屈服屈服

The prevention method has to be adopted to its different section and its structure for the purpose of deformation prevention.

针对不同形式外形结构依据特点采用不同变形方法

If the pad is too soft, dot business card printing and membership card making easy to deformation.

衬垫会员卡便当变形

Platen paper teeth are mostly solid, but they still in the fast-moving, easy-to-deformation emergency stop when the inertia.

实心高速运动变形惯性

The invariant space has to be as well a deformation of a classical space, a deformation that makes it noncommutative.

这些空间同样也是经典空间变形它们通过这种形成空间

The retractable air door has no deformation when the downhole pressure of a coal mine changes.

一种煤矿井下压力出现变化变形风门

The bolt is a new kind of structural bolt. Few researches have been carried out on its force, deformation and action mechanism at present.

柔性一种结构锚固机理新颖全长锚固有的研究缺少锚固锚固机理分析

For the rigid-body model, the fault has no internal deformation, thus the bed remain its length after rotation.

刚性旋转内部没有任何塑性变形因此地层长度没有变化

Experimental results show that this algorithm can achieve exact deformation with low calculation cost.

实验表明算法计算代价实现精确变形