spindle
美 [ˈspɪnd(ə)l] 
英 ['spɪnd(ə)l]
- n.轴；纺锤；心轴；指轴
- v.长成细长茎；长(变)得细长；装锭子于
- adj.像锭子的；母方的
- 网络主轴；纺锤体；纱锭
词形变化
复数：spindles 同义词
英汉双解
1. | 轴；心轴；指轴a long straight part that turns in a machine, or that another part of the machine turns around |
2. | （手纺用的）绕线杆，纺锤a thin pointed piece of wood used for spinning wool into thread by hand |
英汉解释
英英解释
例句
She found her mother vexed with her, for she had wanted to reel yesterday's yarn and had discovered that the spindle was not full.
她发现母亲在生气，因为母亲准备绕起昨天纺的纱线，发现纱锭没有纺满。
"See that you bring home a full spindle, " her mother always said.
“等你带回满满一锭纱线哦。”母亲总是这样说。
The beautiful maiden took the flax from her head, wound it round the stem of a slender birch, grasped the spindle, and began to spin.
少女从她头上取下亚麻，将它绕在一根细细的白桦树枝上，抓起纱锭开始纺纱。
Every morning when she left home her mother gave her a little basket with a slice of bread and a spindle.
每天早上她离家的时候，母亲会给她一个小篮子，里面装着一片面包和一个纱锭。
" Then she showed her mother today's spindle and said: " See, today I more than a made up for yesterday.
她把今天的纱锭给母亲看，说道：“看，今天纺得很多，补上昨天的还有多余呢。”
And someday, they say, they may be able to manipulate spindle activity to help light sleepers catch more zzz.
他们也说，或许有一天，可以人为操控睡眠纺锤波，来让那些浅眠的人们能够拥有更好的睡眠品质。
pertaining to the dense specialized portion of a chromosome to which the spindle attaches during mitosis.
关于一个染色体上密集的专门的区域，有丝分裂时梭形纤维附着于此。
Refer to the above calibrated distance (value) and Grinding the front cover for the spindle bearings' preload. The preload value is.
根据以上测定距离（值），磨前端盖用于主轴轴承的预载。预载值为。
fusiform Spindle-shaped; used in reference to the body shape of a fish which is cylindrical or nearly so and tapers toward the ends.
纺锤型纺锤形的；用于描述鱼的体型呈现或近似圆筒形并且朝向末端逐渐尖细。
A shirt rotating shaft is often called a spindle.
衬衫转轴是通常被称为主轴。
Are output boards at the bottom of each spindle inspected on the hole size & location, hole registration and hole quantity etc?
每轴底部的板子是否检验其孔尺寸，孔位，孔对准度与孔数量等？
At home and abroad, there is not a CNC device about saddle groove processing which referred to X axis, Z axis and spindle rotating.
国内外还没有适合于X、Z和主轴旋转的三方面具备马鞍坡口加工的CNC装置。
The spindle, to which the milling cutter is attached, may be horizontal (for slab milling), or vertical (for face milling).
纺锤，铣刀附上，也许是水平（为碾碎的平板），或者垂直（为端铣）。
The spindle can be fed up and down with a quill feed lever on the head.
主轴可受够了上下同在头上羽毛饲料杠杆。
A cylinder with its connecting part matching the bench drill spindle is located on the upper end of the shell.
壳体上端设有圆柱体，圆柱体具有与台钻主轴匹配的相连部位；
In her works the spiralling spindle represented the beginning of chaos.
在她的作品里，旋转的纺锤代表了混乱的开始。
The Thermal Properties of Spindle Assembly and Headstock is one of the main elements that influence machining precision.
机床主轴部件和主轴箱的热特性是影响机床精度的主要因素之一。
We report a case of chordoma containing a spindle cell sarcomatoid component with a gradual transition from conventional chordoma.
我们报告一例脊索瘤载有梭形细胞肉瘤样成分，以逐步过渡到传统的脊索瘤。
Tiny had to turn the spindle, and the field-mouse hired four spiders, who were to weave day and night.
鼹鼠聘请了四位蜘蛛，日夜为她纺纱和织布。
First of all, compressor lubrication oil pump is usually composed of spindle drive of the compressor.
首先，压缩机润滑油泵通常是由压缩机主轴驱动的。
The spindle method of training apple and pear trees was developed in Germany in the 1930's.
苹果和梨的纺锤形整枝方法，是三十年代在德国发展起来的。
another non-contact proximity switch is arranged on a proximity switch mounting plate on one side of the bottom end of the cylinder spindle.
缸芯轴底端一侧的接近开关安装板上设有无触头接近开关。
After machining, the part program calls for a plastic chip fan, available from Big Kaiser, to be installed in the machine's spindle.
在用机器制造以后，部分计划叫为塑料芯片风扇，可得到从大皇帝，被安装在机器的纺锤。
Basically, an adjustment of the spindle nut is only possible in the lift position. Machining is realized in the work position.
基本上，主轴螺母的调整只能的提升位置才能进行.而加工是在工作位置实现的。
The system monitors and records the spindle speed, torque, temperature, pressure and leak rate of the seals under test.
也可测试并记录密封件的轴速、扭矩、温度、压力和泄漏率。
Are output boards at the bottom of each spindle inspected the dimension?
每轴最下面的板子的板子是否检验尺寸？
Caster is the forward or backward tilt of the spindle or steering the knuckle at the top when viewed from the side.
卡斯特是向前或向后倾斜的主轴或转向上方的关节时，从侧面看。
There in a small room sat an old woman with a spindle busily spinning her flax.
当她转动金钥匙时，门一下子就开了，一个老太婆坐在里面在忙着纺纱。
It is one of the key technologies of refitting ultra-high speed grinder to select the radial and axial gap of the main spindle.
试验证明合理的选择主轴径向间隙和轴向间隙是改装超高速磨床的关键技术之一。
I cried out impatiently, and instantly the yarn [174] disappeared from the spindle as if blown away.
我不耐烦的叫起来，马上，纱锭上的线不见了，好像被风吹走了似的。
The spindle is always hollow, i. e. , it has a through hole extending lengthwise.
主轴始终是空心的，例如，它有一个纵向无限延伸的孔。
Every spindle is driven by a AC motor individually powered by an individual inverter.
单锭独立交流马达变频驱动。
The correlation between the cutting width limit and the rotation speed of the spindle in a regenerative chatter system was derived.
推导了机床再生型切削颤振系统极限切削宽度随主轴转速变化的计算公式。
In this design, the main movement system uses the form of direct high-speed electric-spindle drill to achieve drilling campaign.
在本文的设计方案中，主运动系统采用高速电主轴直联钻头的形式，实现钻削运动；
Modern CNC machining centres can compensate the spindle rotation with its forward feed, the so-called synchronisation .
现代的CNC加工中心能够补偿带有计算进给量的主轴旋转，这就是所谓的同步性。
She clasped her hands to her head and looking down at the unfilled spindle she burst into tears.
她攥住脑袋，看着地上没纺满的纱锭，又哭了起来。
High-capacity disk systems, capable of holding many gigabytes, consist of perhaps five to ten rigid disks mounted on a common spindle.
大容量磁盘系统，能够保持多字节，由或者五到十硬磁盘上常见的主轴。
It is good to call metaplastic carcinoma with spindle cell and osseous differentiation.
将之称为伴有梭形细胞分化和骨样分化的化生性癌好一些。
Tool management system provides storage for up to 120 drills per spindle, automatic tool change when maximum hits reached.
钻刀库可以存放120把刀每个钻轴，在钻孔时可以自动的更换钻刀。
The processing equipment consists of the worktable and spindle as well as the motors and controls needed to drive them.
制造装备包括工作台、主轴、电机及控制驱动单元。
The spindle in the work process of chopping stems was bound to be shocked and vibration.
主轴在切碎茎杆的工作过程中，不免要受到一定的冲击和振动。
