hydroforming
美 ['haɪdrəˌfɔrmɪŋ] 
英 ['haɪdrəfɔ:mɪŋ]
- n.【化】加氢重整
- 网络液压成形；临氢重整；液力成形
英汉解释
英英解释
例句
In hydroforming applications hydraulic presses are used for closing hydroforming dies.
在内高压的应用中，液压机用于闭合内高压成形模具。
Sheet hydroforming has proven to be an effective method for manufacturing complicated parts.
板充液成形已被证明是制造复杂零件一种有效的方法。
The Hydroforming Press is equipped with Interlaken's UniPress Control System for reliable and precise control over the hydroforming process.
内高压成形新闻配备了因特拉肯的UniPress公司控制系统的可靠和准确的对成形过程控制。
The technology of tube hydroforming has gained wide range application over the last few years.
管材液压成形技术近来获得了广泛的应用。
A significant technique named hydroforming, by which many hollow light components can be produced, is presented to balance the contrast.
内高压成形技术正是适应这种需求而提出来的一种制造空心轻体构件的新工艺。
The support flanges are formed by pinching the blank during the hydroforming process to provide a double thickness flange.
在液压成形工艺期间，通过挤压坯料形成支撑凸缘，以提供双厚度凸缘。
The hydroforming technology is widely used today in the mass production of lightweight components for the automotive industry.
液压成形技术的广泛使用是今天在大规模生产的轻型部件为汽车行业。
It has been experimentally indicated that moderate wrinkling will make a contribution to enhancing the formability of tube hydroforming.
实验结果表明，适度的起皱有助于提高薄壁管内高压成形的成形极限。
With superior control over forces and motions, Interlaken's Hydroforming Press provides a greater overall quality of formed parts.
随着对力和运动控制优势，因特拉肯的内高压成形媒体提供了更大的组成部分的整体素质。
When the thickness of tube increase, the formability of the tube is better too, but the internal pressure for tube hydroforming is higher.
随着管材厚度的增加，管材的成形性能也会越好，但所需的成形压力也越高。
Hydroforming & Warm FormingInterlaken's Hydroforming Press Systems are for use in production or process development applications.
内高压成形及热成型因特拉肯的内高压成形压机系统是在生产或工艺开发应用。
Sheet warm forming process, sheet warm hydroforming process and sheet press forging process are introduced in this paper.
本文介绍了镁合金薄壁板材的温热冲压成形技术、温热液压成形技术和局部热冲锻成形技术。
and simulation of the T-tube hydroforming was performed through finding an appropriate load path.
2建立有限元模型，找出了合适的加载路径，进行了液压胀形仿真。
Tube hydroforming is a developing technology with advanced features of lightweight and single part.
管液压成形为具轻量化与一体化特徵的新兴成形技术。
Unsymmetrical Y-shaped tube hydroforming is applied broadly and it is a difficult point as well.
非对称Y型三通管内高压成形是该项技术中应用较为广泛的部分，同时也是一个难点。
The hydroforming of bulging in the middle of a tube was studied.
选择圆管中间膨胀的液压成形为研究对象。
It is important to design the loading path correctly during the tube hydroforming process.
确定合理的加载路径是管件液压成形工艺设计的关键。
It is showed that the method of optimization design can meet the need of hydroforming a car beam with high forming quality.
验证结果表明，该优化方法能够获得满足质量要求的充液成形的汽车横梁。
An algorithm for tube hydroforming was presented, which was based on the dynamical explicit method and BT element.
根据动力显式增量有限元方法和BT壳单元提出了液压胀形模拟算法。
Research on hydroforming of square-section hollow components made of stainless steel
不锈钢方形截面空心构件内高压成形研究
Tailor-welded tube in hydroforming and influence of the heat affected zone on bulge forming
焊缝管液压成形技术及热影响区对成形的影响
Investigation on the Corner-filling Ability and Formability of Tube in Hydroforming with Radial Crushing
径压胀形中管材的填充性及成形性分析
Effects of loading paths on thickness distribution of a hydroforming component
加载路径对内高压成形件壁厚分布影响分析
Study of Hydroforming Technology Data Collecting System
液压成形技术数据采集系统的研究
Present Situation of Tube Hydroforming and Its Applications in the Automobile Industry
管件内高压成形及其在汽车工业中的应用现状
Hydroforming of Rear Axle Arm Part used for a Car
轿车后轴纵臂内高压成形研究
Research and development of a computer control hydraulic press for tube hydroforming process
计算机控制管件液压成形液压压力机的研制
Hydroforming of Compensator Joints Numerical Simulation
补偿器接头内高压成型数值仿真
Safety Assessment of Hydroforming Equipment on Semi- quantitative Risk- based Analysis
基于半定量风险分析的加氢装置安全评估
Design and Manufacture of the Hydroforming Equipment for Complex Metal Sheet Parts
复杂冲压件液压成形装备的设计与制造
Sheet hydroforming and its related production design
板金液压柔性技术及其产品设计
Estimation of Residual Contact Pressures in CRA-lined Pipe Manufactured by Hydroforming Process
复合管液压成形装置及残余接触压力预测
Numerical modeling of pre-forming process design in hydroforming automobile subframe
汽车副架液压胀形预成形工艺设计的数值模拟
The Hydroforming Process with Radial Self-energizing Seal for Manufacturing Bimetal-lined Pipe
基于径向自紧密封的双金属复合管液压成形
Effect of the feeding pressure on experiment of hollow crankshaft hydroforming
补料压力对内高压成形空心曲轴影响的实验研究
Recent developments of the advanced sheet hydroforming
先进板材液压成形技术及其进展
The application of hydroforming technology in automobile industry
内高压成形技术在汽车工业中的应用
Failure Analysis and Countermeasures of Tube Hydroforming Process
管子液压胀形工艺的缺陷分析及对策
Mechanism Analysis on Reducing Pressure of Tube Hydroforming through Preform
通过预成形降低内高压成形压力的机理分析
Research on square lightweight component by hydroforming process
方截面轻体件的内高压成形研究
