bearings

bearings

美 [ˈberɪŋ] 　英 [ˈbeərɪŋ]

• n.方位；【机】轴承；联系 (on； upon)；意义
• v.“bear”的现在分词
• 网络轴承数；轴承型号；轴瓦

词形变化

同义词

英汉解释

英英解释

例句

In a second the whole affair, in all its bearings, went spreading before the eye of his imagination like the rapid unrolling of a panorama.

一转眼工夫，这回事的全盘经过，象一大幅壁画似的，倏地展开在他的想象里。

We are trying to get our bearings, find out where the bottom is in order to put one foot in front of the other.

我们正在努力找准自己的位置，找出底部在哪以便于一步一步地前进。

Active Magnetic Bearings (AMB) have such a lot of advantages that it is called a technology revolution in the bearings.

磁悬浮轴承由于具有一系列独特的性能，被称为是支承技术的一场革命。

I pronounce the term at the very moment that it is going to be a matter taking our bearings about what is involved in this sublimation.

我宣布「升华」这个术语，就在它的内涵将会影响到我们的动见瞻观。

And then, a time always comes in an artist's life when he must take his bearings, draw closer to his own center, and then try to stay there.

其次，在艺术家的生涯中总会有这么一刻，他无论如何都要审视自己的处境，向自己的核心进发，并争取能在那里久驻。

And what I calculated was the terminal velocity as a function of radius of these ball bearings.

我计算的是终端速度，作为这些钢珠的，半径函数。

Measurement of graphite sleeve bearings and the diameter of the shaft and see that they meet the surface finish.

测量石墨轴承的孔径和轴套的轴径，并察看它们配合面的光洁度。

So we're going to get a list here of the diameters of the ball bearings, and the diameters is in inches.

我将列出这些，滚珠的直径，以英尺作为单位。

Now that you're more familiar with the local economy, the next step is to take out a map and get your bearings.

现在，你更加熟悉当地经济，下一步就是拿出一张地图知道您的方位。

The properties of this tracking method are compared with that of the bearings-only tracking method.

结合有关性能，还将多方位-速度跟踪和仅方位跟踪进行了比较。

The cylinder's flat bottom allowed the ball bearings to shift out of alignment and into a less dense pack.

那是因为圆柱体的瓶底让球体滚出列队从而导致包装不紧密。

The results show that the main bearings can still be in a state of fluid lubrication when the journal misalignment angles are small.

结果表明，轴颈不对中倾斜角度较小时，主轴承仍能够处于流体润滑状态；

Since the usage of these bearings allows very loose tolerances, extreme trike frame alignment will not be a critical issue.

由于这些允许的用法非常宽松的公差，极端三轮车帧定位将不会是一个关键问题。

That the engines do not add more oil rather less, add less easy to burn bearings, Cadogan point has little to do.

认为发动机加机油宁多勿少，加少了容易烧轴承，加多点关系不大。

Two groove of the inner ring and outer ring groove for the ball between the form of a drum, equipped with roller bearings.

二条滚道的内圈和滚道为球面的外圈之间，装配有鼓形滚子的轴承。

It's so easy to lose one's bearings in the underground passages between the terminals at the airport.

人们很轻易在机场地下通道终点站之间迷掉标的目的。

He said the use of torture reflected America "losing our moral bearings" .

他说刑讯逼供反映出美国‘正在失去我们的道德观念’。

The figure seemed to take its bearings for a few moments, then set off with light, quick strides, its long cloak rustling over the grass.

那身影似乎在弄清自己的方位，过了片刻，便迈着轻快的大步往前走去，长长的斗篷拂过草地沙沙作响。

NEW YORK (AP) -- It's hard enough to get your bearings when the time changes twice a year.

纽约（美联社）--当时间一年变化两次，这很难足以让你满足。

and a pair of spaced bearings mounted in the bore of the bearing housing and receiving the crank shaft.

一对间隔开的轴承，安装在所述轴承外壳的孔中，并容纳所述曲柄轴；

In the parlor, Collins quickly got his bearings.

柯林斯进入客厅后很快就辨认出了他所处的位置。

SKF universally matchable bearings with clearance can be combined in sets of any number of bearings .

带游隙的SKF任意配对轴承可结合在包括任何数量轴承的轴承组中。

China's State Council has ordered an investigation into the proposed takeover of a state-owned machinery maker by a German bearings company.

中国国务院（StateCouncil）已下令对德国轴承企业舍弗勒（Schaeffler）收购一国有机械制造商一事展开调查。

Detailed information about materials used for cages can be found in the section "Material for rolling bearings - Cage materials"

有关保持架所用材料的详情可以在“滚动轴承的材料——保持架材料”一节中找到。

Separate bearings, rings on each side must be marked on the surface of a sign of integrity.

对分离型轴承，必须在每个套圈端面上标上完整的标志。

Refer to the above calibrated distance (value) and Grinding the front cover for the spindle bearings' preload. The preload value is.

根据以上测定距离（值），磨前端盖用于主轴轴承的预载。预载值为。

An experimentation with defect bearings shows that this approach is an effective and short-cut method.

在实验中的应用表明，利用该方法诊断滚动轴承局部故障简捷有效。

The adjacent girders of isolated bridge with lead rubber bearings are easy to collide with each other under earthquake excitation.

铅芯橡胶支座隔震的桥梁在地震作用下相邻梁体问容易产生碰撞。

Prestress technic has been used in concrete columns and the anti-pulling bearings of the latticed shell.

为了抗风需要，支撑网壳的抗拔支座及混凝土柱采用了预应力技术。

Small bearings with a bore diameter up to 100 mm can be properly mounted by measuring the lock nut tightening angle .

孔径最大为100毫米的小型轴承可通过测量锁定螺母的紧固角度正确安装。

In the case of type bearings can not be separated, allowing a ring-side at the surface, marked with a symbol of integrity.

对于不可分离型轴承，允许在一个套圈端面上，标上完整的标志。

Thisallows them to be safely mounted horizontally (unlike sleeve bearings), since the fluid being pumped lubricates the top of the shaft.

这使他们能够安全地安装横向（与套筒轴承），自润滑液被抽上方的骨干。

Support the body by the high stiffness of the porous air bearings for static air flotation support, using as a porous ceramic material.

支撑体由刚度高的多孔质静压空气轴承提供气浮支撑，采用如陶瓷类的多孔质体材料。

The main components of a rotor, the two star wheels, the body, the main bearings, power conditioning devices.

主要部件为一个转子、两个星轮、机体、主轴承、能量调节装置。

You pay for that, and people try to reduce friction with bearings and with lubrication, oil.

这很费事，为了减小摩擦，人们使用轴承和润滑油。

Heating in the bearings may be due to the lack of oil , dirty oil, or to an overtight belt .

轴承发热可能是由于缺油、油不干净或皮带过紧所造成的。

the inner cavity of the front end cover filled with circulating water or compressed air to cool the bearings.

前端盖内腔体通有循环水或压缩空气以冷却轴承。

Four-point bearings should not be used for predominantly radial loads due to the high friction at four-point contact.

四点轴承不应使用为主要由于在四点接触摩擦高径向负荷。

These bearings have no central rib on the inner ring and are therefore able to use longer barrel rollers.

这些轴承已没有中央肋骨的内圈，因此能够使用较长每桶辊。

The instrument is suitable to measure curved surface profile appearance of various parts of the rolling bearings.

该仪器适合滚动轴承各类零件曲面轮廓形貌测量。

Bearings should be installed in a dry, dust-free room away from metalworking or other machines producing swarf and dust.

轴承的安装应在干燥无尘的室内进行，远离金属加工设备或其它产生金属碎屑和灰尘的机器设备。