splines
美 [sp'lɪnz] 
英 [sp'lɪnz]
- n.【机】花键；方栓；止转楔；齿条
- v.开键槽于；用花键(或方栓)联接
- 网络样条线；样条函数；样条曲线支持
词形变化
复数：splines 同义词
英汉解释
英英解释
例句
The one-dimensional many-knot splines interpolation algorithm is extended to that of two dimensions, which is applied to image processing.
将一维多结点样条插值算法推广到二维，建立了用于图像数据的插值公式；
Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.
为了使气动热力模型更好的逼近涡轮发动机，应用成熟的非均匀B样条来拟合部件特性。
XY data can be modelled using a toolbox of linear regression models, nonlinear regression models, interpolation, or splines.
使用工具箱的线性回归模型、非线性回归模型、插值或样条，可以参照XY数据。
Straight-sided splines for cylindrical shafts with internal centering. Dimensions, tolerance and verification.
内径定心平行边圆柱形花锥.尺寸，公差和检验
This machine can broach unthreaded holes and internal splines by replacing the main and auxiliary tool holders and the industrial equipment.
3本机床通过更换主、辅刀夹头及工装可拉削不同的光孔和内花键。
The following illustration shows four cardinal splines passing through the same set of points.
下面的插图显示了经过同一组点的四个基数样条。
Multivariate splines are applied widely in approximation theory, computer aided geometric design and finite element method.
多元样条在函数逼近、计算几何、计算机辅助几何设计和有限元等领域中均有很广泛的应用。
The inner gears have been made with splines and a bevel modifier.
内部的传动机构是用样条线配合倒角修改器做出来的。
This system works with straights and arcs, as opposed to splines, for a fast and accurate method of laying down track.
这一系统使用直轨和弯道来代替花键以提高轨道铺设的的速度和精确性。
Cubic splines interpolation was used to get smooth corneal surface.
采用三次样条曲线插值角膜的内外表面。
Finally, a part distortion of mesh is realized with both Multilevel B-Splines surfaces fitting method and triangular parameterization.
将多层次B样条曲面拟合方法与三角网格参数化结合，实现了三角网格模型的局部变形。
The following example draws three cardinal splines that pass through the same set of points.
下面的示例绘制了三条通过同一组点的基数样条曲线。
This tool helps us to create several sections of an object from cutting lines by drawing Splines over the model.
此工具可以帮助我们创建一个物体的零件，通过在物体表面画分割线。
These applications use sophisticated rendering primitives like outlined text and cubic splines.
这些应用是用了复杂的渲染原语，如轮廓字体、三次样条。
The change of direction places stress on the contact points of the splines, locking the drive shaft and hub together.
方向改变给花键的触点施压，把驱动轴和毂盘锁在一起。
I also used editable poly, and sometimes also splines, to model the scene for my lamp to be placed into (Fig. 06 and 07).
我还是使用多边形建模，有时也用样条曲线，来构建放置古灯的场景，如图6和图7。
Correct positioning of the pitman arm on its shaft is ensured by match marks or by wide splines.
正确定位的连杆臂就其轴是确保赛事马克或由广泛的样条。
Chapter 3: Discusses the application of the non- polynomial splines, B-splines to solve partial differential equations.
第三章讨论了非多项式样条、均匀B样条在求解偏微分方程数值解中的应用。
Also, some forms of splines have singularities where the curve veers off into infinity.
样，一些形式的曲尺有奇异点，在这里曲线转向无穷远。
Quadratic splines need at least 3 points.
二次曲线样条至少需要3个点。
Non-Uniform Rational B-Splines (NURBS) provide a powerful tool in Geometric modeling and have been widely used.
非均匀有理B样条（NURBS）因其优越的性能而在几何造型中校广泛应用。
The four splines in the preceding illustration share the same tangent line at the starting point.
上面插图中的四个样条共享起点处的同一条切线。
straight cylindrical involute splines - metric module , side fit - part 1 : generalities.
圆柱直齿渐开线花键。米制模数齿侧室心。第1部分：总则。
Techniques for interacting with scene geometry, lights and Splines.
技术与现场几何，灯光和样条。
straight cylindrical involute splines - metric module , side fit - part 3 : inspection.
圆柱直齿渐开线花键。米制模数齿侧室心。第3部分：检验。
straight cylindrical involute splines - metric module , side fit - part 2 : dimensions.
圆柱直齿渐开线花键。米制模数齿侧室心。第2部分：尺寸。
If all is well, clean the splines of the drive shaft and inside the hub thoroughly.
如果一切都正常，全面清理驱动轴的花键，还有轮毂内侧。
Splines are permanent keys integral with the shaft, fitting in keyways cut in the hub.
样条与轴，在削减键槽的枢纽永久不可分割的关键配件。
Defines Bezier splines and identifies the classes needed to draw them .
定义贝塞尔样条并确定绘制这些形状所需的类。
Before the advent of mathematical splines, designers used physical splines to draw curves.
在数学样条出现之前，设计者利用物理样条绘制曲线。
It is convenient for the mathematical analysis and applications of B-splines.
它为B-样条函数的数学分析和广泛应用提供了方便；
It won't be surprising to most people who know about track construction that there are no splines in sight!
对那些熟悉轨道铺设的人来说，没有出现花键一点也不值得惊讶！
There are three common solutions to this problem: dowels, joining plates and splines.
一般有三种方法来解决这个问题，圆木榫、饼干榫和木楔。
Ensure everything is dry and apply the correct Ford sealant to the splines.
确保一切零件都是干燥的，在花键上使用正确的福特密封剂。
The solid and dot splines was printed with IGT apparatus and the print gloss were measured.
通过实验室IGT适性仪打印实地和网点样条，测试其光泽度。
Try working with curves other than the default splines to develop your inbetweening.
努力工作，与其他曲线比默认样来发展你的细化。
Start by tracing the deepest layer (the most planks) using splines .
开始追查最深层（最木板）利用曲线。
The stub pitch for splines in this standard is twice the diametral pitch.
在本标准中，花键的残余径节是径节的2倍。
A new and unique shaving spline fixture has been designed for splines couldn' t be processed or cylindrical surface.
针对在圆柱表面上刨床无法加工花键的不足，设计了一种新颖的刨花键夹具。
In this paper, a new method which based on the curves of rational quadratic splines was presented to enlarge images.
提出了一种新的基于有理二次样条曲线的图像放大方法。
