spline
美 [splaɪn] 
英 [splaɪn]
- n.【机】花键；方栓；止转楔；齿条
- v.开键槽于；用花键(或方栓)联接
- 网络样条曲线；样条线；云形线
词形变化
复数：splines 同义词
英汉解释
英英解释
例句
The genetic algorithm is usually selected as an optimization tool for the least square fitting about ordered plane data by B-spline curves.
在B样条曲线的最小二乘拟合平面有序数据问题中，经常采用遗传算法进行优化。
The word "spline" once referred to a piece of flexible wood, rubber, or metal used to draw curves on a piece of paper .
单词曲尺曾经指的是惯于在一张纸上绘制曲线的一片柔软的木头，橡胶或金属。
This method through the point's density distribution on the die profile could control fitting error of the curvature of the arc spline.
该方法可通过拉弯件轮廓曲线上布点的密度来控制模具轮廓曲线上曲率分段的多少和误差大小。
An analysis on the cold extrusion process and a technological experiment were made for the two spline ends of a slim drive shaft .
细长传动轴两端花键头进行了冷挤压加工分析与工艺实验。
You'd then anchor a spline to the points and use a pencil to draw the curve along the spline as it bent around the points.
然后你将曲尺锚定在这些点上并用铅笔沿着曲尺绕着这些点的方向绘制这条曲线。
A designer would place the spline on a piece of paper and anchor it to a given set of points .
设计者把样条放置在一张纸上并锚定到一组给定的点上。
The surface of the paddle blade is non-uniform rational B-spline surface, the surface has met precision requirements for paddle blade.
桨叶曲面为非均匀有理B-样条曲面，达到了桨叶曲面的精度要求。
The spline is specified by an array of points and a tension parameter.
样条由点的数组和张力参数指定。
Fills the interior of a closed cardinal spline curve defined by an array of.
结构数组定义的闭合基数样条曲线的内部。
By numerical simulation of a six-tooth rectangle spline, the optimized half-angle of the concave die can be got.
结合六齿矩形花键轴实际成形情况进行模拟计算，获得了入模半锥角的较佳取值范围。
This paper implements a real-time NURBS (Non-Uniform Rational B-Spline) path interpolator for a six-axis are welding robot.
给出了一种六轴弧焊机器人的实时NURBS路径插补方法。
This could be use to navigate the camera along the spline (curved line) to its intended concept.
这可能是用于导航，沿样条（弯线）至预定的概念相机。
In a closed cardinal spline , the curve continues through the last point in the array and connects with the first point in the array .
在闭合的基数样条曲线中，曲线连续通过系列中最后一个点，并与系列中的第一个点连接。
Specification of the spline cold rolling mill hydraulic system for the demonstration of the system and design note.
本说明书主要对花键冷滚轧机液压系统进行了系统的论证和设计说明。
Finally, the Subsection Cubic Spline interpolation was used to analyze the Pitch curves which provide a method for the further work.
最后运用三次样条插值对其节曲线了进行研究，这为后续的设计制作提供了一定的依据。
The yoke might be rigidly welded to the shaft tube or it might be a spline, or slip yoke.
轭可能强硬地被焊接到桥管，否则它可能是一个云形规、或滑轭。
The following illustration shows a set of points and a cardinal spline that passes through each point in the set.
下面的插图显示了一组点和经过这一组点中每一点的基数样条。
A given set of points could yield a variety of curves, depending on the properties of the physical spline.
一组给定的点可以产生各种各样的曲线，这取决于物理样条的属性。
The numbers are a text spline with an extrude modifier, and then an array over the clock's surface.
数字是用文字样条线配合挤压修改器做出来的，然后在钟表表面进行阵列。
and a supporting tube is sleeved outside the spline shaft position between the box body and the gearbox body of the bevel gear.
位于箱体和伞齿轮变速箱体之间的花键轴部位外套支撑管。
A cardinal spline is a curve that passes smoothly through a given set of points .
基数样条是平滑通过一组给定点的曲线。
Nominal Clearance is the actual space width of an internal spline minus the actual tooth thickness of the mating external spline.
理论侧隙是内花键的实际齿槽宽减去与之相互配合的外花键的实际齿厚所得的值。
Cardinal B-spline wavelets have been widely used in multi-resolution modeling for curves and surfaces.
在多分辨率曲线和曲面造型中，B样条小波已经得到广泛应用。
The spline data is of course different as the spline on the samples was on the wrong end.
这个样条数据当然不同，因为基于这些抽样点的样条是在错误的端点上。
A new finite element space is studied in which the scaling function of B-spline wavelet is considered as the shape function of tetrahedron.
研究了一类新的有限元空间，它以B样条小波函数作为有限等参元的形状函数；
To model the dog tags, I've used a spline like guide and with the spacing tool, I distributed some spheres in the spline.
为了构建狗的标牌，我使用一个样条曲线，在间隔工具的帮助下，我放了一些球到曲线上。
The program and drawing procedure for determining the normal gear shape of a rectangle spline hob are introduced.
介绍了确定矩形花键滚刀法向齿形的程序及绘图过程。
A physical spline is a thin piece of wood or other flexible material.
物理样条是一块薄木片或其他有弹性的物质。
The size-dependent effect of energy and binding energy of hydrogen-like donor impurity quantum ring are calculated with B-spline technique.
利用B样条技术计算类氢施主杂质量子环能级和束缚能的量子尺寸效应。
This paper presents a study on transition between sections of B-Spline curves when used in direct interpolation algorithm.
本文主要对基于B样条类曲线的直接插补算法的曲线段间过渡问题进行了研究和阐述。
Overloaded. Draws a closed cardinal spline defined by an array of.
结构的数组定义的闭合基数样条。
In the computer geographic mapping, the tension spline interpolation is an effective method to realize the smoothing curve.
在微机地理制图中，张力样条插值法是一种有效实现光滑曲线的方法。
Simulation shows that the B-spline curve fitting method is a more reasonable and effective path planning method.
仿真结果表明，使用粒子群算法优化出来的B样条曲线比多项式拟合法和几何方法更加合理有效。
The Bezier spline is always anchored at the two end points.
贝塞尔曲线总是锚定在两个端点。
Determined the pipe route by the spline interpolation whose nodes were the centers of polygonal largest inscribed circle list.
管道敷设路径则由若干典型装配通路横截面最大内切圆圆心插值曲线来确定；
B-spline smoothing the main local algorithm can be divided into two major categories and the overall algorithm.
B样条曲线的光顺主要可以分为局部算法和全局算法两大类。
The adaptive genetic algorithm was proposed to overcome the shortcoming during the parameter optimization for B-spline curves.
为克服这一缺点，提出了一种自适应的遗传算法对B样条曲线的参数优化。
Spline interpolation could be the powerful supplement for line and arc interpolation as its brevity and smoothness.
而样条曲线插补以其良好的平稳光顺性，成为直线插补和圆弧插补的补充。
So it adopt cubic spline function to structure die cavity outline in this article , the model points may be surveyed on die cavity surface .
因此，这里采用三次样条函数拟合曲线构造模具型腔廓线，其型值点由已有模具型腔测得。
Its features include transparent backgrounds, extensible axes to graph dates, currencies, custom fonts, and spline curve fitting.
它的特征有透明背景，自定义字型，和样条曲线配件。
