abrasion

abrasion

美 [əˈbreɪʒ(ə)n] 　英 [ə'breɪʒn]

• n.磨损；磨蚀；磨去；擦去
• 网络磨耗；擦伤；表面磨损

词形变化

同义词

英汉双解

英汉解释

英英解释

例句

Treatment for an abrasion is similar to that of a burn, since raw skin is exposed to the air and can easily become infected.

擦伤的处理与灼伤的处理类似，因为皮肤里层暴露于空气中，易受感染。

Base on this point, the author make his study from stability and abrasion of the bank.

因此作者从库岸遇水稳定性和风浪再造作用两方面进行了研究。

The sudden arrest of his motion, the abrasion of one of his hands on the gravel, restored him, and he wept with delight.

他的动作突然静止，躺在砂砾上的其中一只手虽遭到擦伤，但是他恢复了意识并欣喜落泪。

"One main problem is the abrasion factor, " he said. "You have to toughen up the skin on the bottom of your feet. "

“一个主要问题是磨损因素，”他说，“你不得不使自己足底的皮肤变得更坚硬。”

Despite these lower velocities, there appeared to be evidence for the operation of impact-abrasion phenomena in such situations.

尽管有这些速度低，出现了以证据为操作冲击磨损现象，在这种形势。这些证据分为若干领域，下面讨论。

Pilling is often the first sign of wear due to abrasion; it causes a cloth to have an unsightly and disheveled appearance.

起球现象是服装穿着磨损的第一个信号，它使织物的外观不雅而且松散杂乱。

I could have broken my ribs falling in that position, but I landed upright on my feet and suffered only a slight abrasion on my right knee.

那种摔下来的姿势本来应该撞断肋骨的，可是我却挺直的双脚落下，只有右膝擦撞了一下。

It may then become permanent on the surface or fall off AS a result of abrASion.

这些纤维球可能会永远粘附在织物表面，或由于摩擦而脱落。

Uses the X pattern of abrasion produced by a rotary action of a pair of abrasive wheels.

通过一对磨擦轮的旋转作用产生“X”型磨擦作用。

TOTAL EDGE COMFORT: The Total Edge Comfort is designed to alleviate abrasion high on the ankle during the break-in process of a skate.

总的EDGE舒适：总边舒适的目的是减轻磨损脚踝高的在休息的时候，在滑冰过程中的一个。

Abrasion is one of the main reasons contributing to unexpected stop, while using cyclone to separate powders coal, coke and aluminum oxide.

当旋风分离器分离煤、砂、飞灰、焦粉和氧化铝基催化剂等腐蚀性颗粒时，磨损是造成非计划停机的主要原因之一。

The result of the inspection was the burnt smell came from continual abrasion of the braking disc.

检查结果发现是煞车碟片持续摩擦而造成烧胶味。

The Si-Mn steel track plate and pin usually exist the early abrasion, one of the main reasons is the burr defect of pin hole.

硅锰钢履带板销孔存在脉纹铸造缺陷是造成履带板与履带销出现早期磨损现象的根本原因之一。

The abrasion - resistant capability can be improved and better than Ni - white cast iron by choosing suitable composition and structure.

适当选择铬系白口铸铁的成分和组织可使其抗磨损性能显著提高，并优于镍硬铸铁。

The wear resistant property of the composite was tested in a three-body abrasion testing. A trial run was carried out on the spot.

在三体磨损试验机上考查了复合材料的磨粒磨损特性，并将该复合材料衬板用于现场装机运行。

furthermore, the abrasion of a rubber stator is small, thus prolonging the service life of the rubber stator.

另外，对橡胶定子的磨损小，从而延长了橡胶定子的使用寿命。

The surface and adjusting media of the valve shaft are nitrogenized so shta it is erosion and abrasion resistant.

阀杆经调质及表面氮化处理，有良好的抗腐蚀性及擦伤性。

They are made of a thin, abrasion-resistant polyamide stretch fabric with individual toe slots that look like your foot.

这鞋是由薄鞋底，防磨尼龙弹力面料鞋面，单独的脚趾套，穿上去，就象是一只猩猩的脚。

This paper deals with the relation of the microstructure morphology of carbon steels to its impact abrasion resistance.

本文论述了不同碳含量碳素钢的组织形态与抗冲击磨粒磨损性能的关系。

The author introduces the causes and solutions to the early abrasion of the clutch with booster of a city bus.

介绍城市客车助力离合器早期磨损的原因及处理方法。

in the long term these factors are still important but are joined by the ability of the aggregate to resist abrasion.

从长远来讲，这些因素依然重要，但另一个新增因素是聚合物抗磨损的能力。

remove all harmful substance in the system , improve refrigerating effect , decrease abrasion , eliminate noise , protect compressor.

清除系统内一切有害物，提高制冷效果，降磨除噪，保护压缩机。

Engineering ceramics has been widely used for its high strength, low expansion rate, abrasion and high chemical stability.

工程陶瓷以其高强度、低膨胀率、耐磨损及高化学稳定性等优越的性能被广泛应用于机械、冶金和化工等工程领域中。

The surface and the adjusting media of the valve shaft are nitrogenized so that it is erosion and abrasion resistant.

阀杆经调质及表面氮化处理，有良好的抗腐蚀性及抗擦伤性。

Abrasion due to daily wear alters the surface features of beads.

珠子由于日常磨损而改变了外表。

Made of weather proofed cotton soaked in turn-of-the-century paraffin for durability and abrasion resistance.

在浸泡的风雨棉花开启本世纪初的耐用性和耐磨性的石蜡。

Abrasion due to daily wear alters the surface features of bead.

日常佩戴造成的磨损改变了（这串）珠子的外貌特点。

So the abrasion resistance of cylinder is a matrix, hard phase, honing, graphite, and the hardness result of multiple factors.

同时缸套耐磨性是基体组织、硬质相、珩磨、石墨、硬度多种因素综合作用的结果。

They are usually harmless and many fade in childhood; those that do not can sometimes be removed by laser surgery or abrasion.

通常无害，有许多在孩童时期会自动褪去，褪不掉的有时可用雷射手术或磨蚀来除去。

It has a very high tear strength, high abrasion resistance and is extremely resistant to oils and greases.

它有着高撕扯性，高耐磨性，及非常好的抗油性。

The cutting tool material should therefore have high abrasion resistance to improve the effective life of the tool.

因此切削刀具材料应具有高耐磨性以提高刀具的有效寿命。

This solar panel coating also offers excellent abrasion resistance and has good dielectric properties, according to the company.

这种太阳能电池板涂层还提供优良的耐磨损性，具有良好的导电性能。

For men, HIV must enter through a cut or abrasion on the penis, through the lining of the urethra inside the penis.

对于男性而言，HIV必须通过YJ上的割伤或擦伤，或是通过尿道膜进入YJ。

erode: To wear (something) away by or as if by abrasion.

腐蚀，侵蚀：（象）被磨擦损耗掉。

Particle trajectory model was used to investigate the region and the degree of runner blade abrasion in different conditions.

采用颗粒轨道模型计算阐明了不同工况不同粒径下，转轮叶片的磨损部位及程度。

It's faced with polycrystalline diamond sintered from diamond powder. It has extremely high hardness, abrasion resistance and serving life.

它的表层为金刚石粉末烧结而成的多晶金刚石，具有极高硬度、耐磨性和工作寿命；

Wear resistance of the coatings was tested on abrasion tester and the wear appearance of the coatings was investigated by SEM.

在磨损试验机上对其耐磨性进行测试，同时利用扫描电镜对试样的磨损形貌进行观察分析。

This may be assessed by means of the aggregate abrasion value (AAV) test.

这种能力可以通过聚合物磨损值（AAV）测试来评估。

The transmission fluid containing the phosphorous boronizing ashless dispersant provided by the invention has better abrasion resistance.

含有本发明提供的磷硼化无灰分散剂传动液的抗磨损性较好。

Using these diagnostics it is shown that pin abrasive tests do not represent high stress abrasion in any industrially-relevant sense.

利用这些诊断结果表明，针磨料测试并不代表高应力磨料磨损在任何工业相关的常识。