blanking
美 [blæŋk] 
英 [blæŋk]
- adj.(子弹等)空的；(努力等)无效果的；(年成等)饥荒的；单调的
- n.空白；空白处；空地；白纸
- v.使无效；使不能通行；【机】冲切
- 网络下料；穿落模；消隐
词形变化
比较级：blanker 最高级：blankest 复数：blanks 现在分词：blanking 过去式：blanked 反义词
同义词
英汉解释
adj. | 1. (子弹等)空的,(精神等)空虚的;(努力等)无效果的;(年成等)饥荒的;无聊的,单调的;(诗等)没有韵的 2. 苍白的,失色的;发呆的,呆呆的,无表情的;漠然的 3. (表格等)空白的,(纸等)无字的;空着的;【商】(支票等)不记名的 |
n. | 1. 空白;空白处,间隔;空地;白纸;〈美〉表格纸,空白表格 2. (精神上的)空虚;(个人生活中的)平淡时期,空签;【军】空弹;目标,靶心白点 |
v. | |
英英解释
例句
See Li-Xia Zheng noting that labor supplies of women squatting on the side blanking Ma Li did not understand.
看到郑丽霞提的是劳保用品，蹲在一旁下料的女工马相莉不解地问。
A blanking production technology of the motorcycle bulb was analyzed, and a set of progressive blanking die was designed for the shell.
分析了一种摩托车大灯灯泡前金属外壳的冲压生产工艺，设计了一套级进冲压模具。
The BFD's unique sequential blanking algorithm allows it to distinguish between a door closing and an object or person in the door opening.
BFD独特的连续消隐算法使其能够区分一个关闭门，一个物体或在开门的人。
Such fine blanking process simplifies die structure, easy to make and to install, and also has low cost.
这种精冲方法，模具结构简单，易于制造和安装，成本低。
Said he got about 3 hours of sleep the night before, but slept pretty well last night. Five-nothing, blanking of the Giants. . .
据说他前天晚上只睡了3个小时，但昨晚睡得很好。五比零，让巨人队一分未得…
Must carry on the blanking force and the center of pressure computation once more. is the blanking technological design finally.
再次要进行冲裁力和压力中心的计算。最后是冲裁工艺设计。
Few manufacturers today are able to master the finesse of blanking and quality of finish needed to meet the Breitling standards.
只有极少数制造商家能掌握这些生产技术并符合百年灵的严格标准。
Blanking process of aluminum alloy shell port of Li battery was analyzed and a set of progressive die was designed for shell.
分析了一种锂电池铝合金外壳端口冲裁生产工艺，并设计了一套完成它的级进冲裁模具。
Alternatively, if the internal bore is not important (a) is the better choice as the gate is more easily removed by a blanking operation.
相反，假如内部孔是不重要的，最好采用（a），因为浇口可以通过冲切较容易地去除。
Intersecting surface of the hard thin wall barrel and the blanking adapter is in shape of circle, square, trapezium or other special shapes.
所述硬质薄壁管的横截面及堵头形状可为圆形、方形、梯形或其他异形。
For inter-digit blanking, all output drivers can be disabled and all sink drivers turned on with a BLANKING input high.
对于位间隔消隐，可通过消隐高输入来禁用所有输出驱动器及开启所有灌电流驱动器。
The bending blanking open is set at the two side of the heat sink oppositely. After bending, assembling a three-bend heat exchanger.
折弯冲裁口分设于散热片两侧，相向设置，经过折弯后组装成三折式热交换器。
Blanking workshop provided by the use of the raw materials of each product quantity, the actual products accounting materials.
按落料车间提供的每种产品使用的原材料数量，核算产品的实际用料。
A fine-blanking die structure is introduced.
介绍一典型精冲模的模具结构。
The effect V-ring indenter on the sheared surface in the fine blanking of shifting fort is investigated by means of finite element method.
使用有限元分析法对拨叉零件的精冲过程中V形齿圈对冲剪面的影响进行了研究。
Through to technological correct analysis of the blanking patterns components, has designed a continual blanking punching die blanking .
通过对冲裁图样零件的工艺性的正确分析，设计了一个连续冲裁冲孔落料模。
Blanking equipment renovation project of the transmission system includes transmission MSTP subsystem.
设备消隐改造工程的传输系统包含了MSTP传输子系统。
It has overcome the shortage generally existing in other domestic like products, e. g. slow blanking speed and heavy operation .
克服了国内其它同类产品普遍存在冲裁速度慢、操作笨重等缺点。
It is mainly used for piercing , blanking, bending, stretching etc.
其主要用于是冲孔，落料，弯曲，拉伸等。
For inter-digit blanking, all output drivers can be disabled with an ENABLE input high.
对于位间隔消隐，可使用有效的高输入来禁用所有输出驱动器。
But this method of shape because parts of dies. the blanking the punching the punch with holes can shorten die life space is too little .
可是采用此方法由于零件外形的落料凹模与孔的冲孔凸模空间太小会缩短模具寿命。
forming of plastic materials, like blanking, stretching and embossing of plates, as well as pressing of plastic and powder products.
也适用于塑性材料的成形如板料的落料、拉伸、压印等以及塑料、粉末制品的压制等多种用途。
The deforming principle of fine blanking is analyzed from streamlines microstructure and microhardness of the testing part.
通过试件流线、金相组织以及显微硬度等方面对精冲变形的机理进行了分析和研究。
Presses of this series are especially suitable for ferrous and non-ferrous materials drawing and parts blanking, .
本机床系列主要用于褐色及有色金属薄板拉伸和零件成型。
Bottom simulating reflector(BSR) and amplitude blanking zone with high velocity above BSR are the indicators of hydrate.
目前识别水合物的主要依据是BSR和其上具有高速特征的空白带。
The pressure-reducing first constant flux blanking plug has been put forward, and its merits in internal leakage and vibration are analyzed.
本文提出了先减压式恒流堵塞器结构，分析了其在内泄漏和振动特性等方面的优点。
Typical Structure of Blanking Die(1) Simple DieThe die that only one process is carried out in one press stroke is called simple die.
冲裁模典型结构（1）简单模具压铸模具的过程中，只有一个是记者进行了一次中风称为简单。
Shedder pins should be in all punches including blanking , cutting, trimming, and piercing punches .
在所有的冲子中都应该有顶出销，包括下料，冲裁，剪边及冲孔冲头。
At the onset of the vertical blanking interval, Inject Inhibit is released returning the camera to normal operation.
在垂直熄灭间隔开始的时候，注射机制被释放来返回照相机到正常的状态。
The blanking sealing structure is used for a sealing structure of the conveyer.
本发明用于输送机密封结构。
The design method of faceplate oblique edge blanking die, die structure, punch structure and matrix structure were introduced in detail.
详细介绍了面板斜刃冲裁模的设计方法和模具结构及冲裁凸凹模结构。
For serious geometry and dimension tolerance of the 3C product, fine blanking process is a quiet important manufacture of stamping.
精密冲切是因应3C产品之高几何精度及尺寸公差要求所不可或缺的解决手段。
drilling and fine blanking as well as the burrs formed on curved surfaces.
钻井和精冲以及弯曲表面形成的毛刺。
Blanking and punching are the processes to separate sheet metal along a closing outline.
下料与冲料都是把金属片材沿着闭合线条进行相互分离的工序。
The Breitling symbol requires 3 successive blanking operations. The tip of the hand is hollowed to receive the luminescent substance.
百年灵徽号需经过三道连续冲切工序。指针尖端被镂空，以便嵌入夜光物质。
On compound dies , piercing amd blanking punches must be on the same plane to prevent material slippage .
在复合模具中，为阻止材料滑动冲孔及下料冲高度应相同。
This article give some quick and practical methods and experience of gear shape data of involute spline gear blanking die.
模具设计的关键是结构设计和参数处理，文章针对渐开线花键冲齿模齿形参数设计提出一些快速、实用的方法和经验。
This paper introduces the application of second generation expert system in blanking technology ES.
介绍了第二代专家系统在冲压工艺设计中的应用。
It is used for vibration damping protection of conveyor belt at material loading blanking point.
缓冲床用于输送带在物料装卸及落料点的减震保护。
The constructer analysis and standards' selection of blanking die's important components.
冲裁模主要零部件的结构分析与标准的选用。
