buffers
美 [ˈbʌfər]
英 [ˈbʌfə(r)] 
- v.缓冲;缓和;保护;使不利影响减少
- n.减震器;家伙;【机】抛(光)盘;抛光工人
- 网络缓冲器;缓冲液;缓冲剂
词形变化
复数:buffers 现在分词:buffering 过去式:buffered 同义词
英汉解释
n. | 8. 缓冲者;缓冲物;缓冲国(= buffer state〕 |
v. | |
英英解释
例句
The buffers can be a pair of JFET op amps or two electrometers with unity-gain outputs.
该缓冲器可以是一对JFET运算放大器或者是两个具有单位增益输出的静电计。
More buffers require more memory but make it less likely for a database object to be rolled out to disk because of a lack of buffer space .
缓冲区越多,需要的内存越多,但会减少数据库对象因缺少缓冲区空间而转出到磁盘的机会。
The increase in storage depends on the size of the buffers and the number of queues to which it applies.
存储方面的增长将依赖于缓冲区的大小和其应用到的队列的数量。
The swap chain might include multiple back buffers and is essentially a circular queue that includes the front buffer.
交换链可能包括多个后台缓冲区,它本质上是一个包括前台缓冲区的循环队列。
The only requirement is that vertex buffers used for software vertex processing must be allocated in system memory.
唯一的要求是用于软件顶点处理的顶点缓存必须在系统内存中分配。
By frequently calling upon their strengths, people can build up natural buffers against misfortune and negative emotions, he said.
他说,人们不断依靠自身的力量,就可以更自如地应付不幸和消极情绪。
It flushes up to 100 events per notification, and buffers up to 1000 events in case of a sudden rise in the frequency of events.
对于每个通知,它所能刷新的事件最多为100个。如果事件的频率骤然增加,它所能缓冲的事件最多为1000个。
The percentage of the pool allocated to either execution plans or data buffers fluctuates dynamically, depending on the state of the system.
池内分配给执行计划或数据缓冲区的百分比随系统状态动态波动。
These buffers are captured in the event of a runtime problem and can be used to aid in problem diagnosis and analysis of the VM's history.
当出现运行时问题时捕捉这些缓冲区,可以用来诊断问题并分析VM的历史。
One of the best buffers to a perceived sea change is to distribute leadership early on.
如果已经预见到重大变故,尽早分配领导权能够提供最佳的缓冲效果。
The first buffer is referred to as the color front buffer. The buffers behind it are called back buffers.
第一个缓存被称为前颜色缓存,它之后的缓存被称为后缓存。
When overridden in a derived class, clears all buffers for this stream and causes any buffered data to be written to the underlying device.
当在派生类中重写时,将清除该流的所有缓冲区,并使得所有缓冲数据被写入到基础设备。
Data in these bufferpools doesn't need to be read from disk when referred to, but can be taken directly from these memory buffers.
这些缓冲池中的数据在被引用时不需要从磁盘读取,而是可以直接从这些内存缓冲区提取。
It is now just as typical of the many Chinese boomtowns that are hitting the buffers.
而今当这些忙碌的小城纷纷折戟,它也未能幸免于难。
Large scroll surface characteristics: buffers, I charged the ball, the slope surface, kickbacks and sets the target is everything.
大型卷动台面的特点:缓冲器、落球口、斜坡面、回扣和落下的标靶都应有尽有。
The format, order, and contents of the buffers are meaningful only to the front-end and back-end drivers.
缓冲区的格式、顺序和内容仅对前端和后端驱动程序有意义。
VM initialization starts trace with a small set of trace points that are captured to wrap around in-storage buffers.
VM初始化过程用一小组跟踪点启动跟踪,这些跟踪点被捕捉到回绕式存储内缓冲区中。
Note that this code is optimized for clarity, not efficiency: it buffers too much.
请注意,这段代码是为了清楚起见,而没有考虑效率:它缓冲的内容太多。
The map consists of a set of bindings between table columns and local buffers (variables) in the consumer application.
此映射由表列和使用者应用程序中的本地缓冲区(变量)之间的一组绑定组成。
We spit out the buffers of a DRDA trace and put them into the actual JCC trace; after all, JCC uses DRDA to communicate with the server.
我们从DRDA跟踪中获取缓冲区,然后将它们放入实际的JCC跟踪中。别忘了,JCC使用DRDA来与服务器进行通信。
Today, one-third of the Delmarva farms have planted trees, technically known as vegetative environmental buffers.
今天,戴玛瓦地区三分之一的农场已经种植了树木,从技术上而言,这些树木被看作是植物的环境缓冲器。
Running this query with IWA took nine minutes, and we were able to reduce the size of the Informix memory buffers.
在结合IWA技术的情况下运行此项查询只需花费9分钟时间,我们可以减少Informix内存缓冲。
The contents of these buffers can sometimes identify root cause, as well.
这些缓冲区的内容有时候能够指出问题的原因。
Hence, it makes a lot of sense to make these buffers large enough to hold as much data as possible.
因此,合理的做法是将这些缓冲区设置得足够大,以容纳尽可能多的数据。
Parameter value specifies the maximum number of buffers that the full-text memory manager should maintain in a small buffer pool.
参数值指定全文内存管理器在小缓冲池中可以维护的最大缓冲区数。
Since the C language is inherently unsafe, it allows programs to overflow buffers at will (or, more accurately, completely by accident).
由于C语言本质上的不安全性,所以它容许程式随意(或者更准确地说是完全出于偶然)溢位缓冲区。
In this program, since the problem is trivially parallelizable, you can actually have as many buffers as the SPU's local store can support.
在这个程序中,因为问题在于可并行性很一般,所以实际上可以使用SPU的本地存储能够支持的任意数量的缓冲区。
String pooling allows what were intended as multiple pointers to multiple buffers to be multiple pointers to a single buffer.
字串共用可以让原来要指向多个缓冲区的多重指标成为指向单一缓冲区的多重指标。
Now you need to determine how to store which buffers are currently "filling, " and be able to set these flags without branching.
现在,需要决定如何存储当前为“filling”的缓冲区,并能够设置这些标志;同样,不使用分支。
By building large buffers you product more parts(increase the speed of your process) but slow down the speed of materials.
设置巨大缓冲区生产过多零件(增快制程速度)但是降缓了物料速度
In many cases, the biggest performance increases will come from adding as many buffers as you can.
在许多情况下,最大的性能提升将得益于添加尽可能多的缓冲区。
If memory efficiency and performance are significant, a parser that uses protocol buffers might be a better choice.
如果内存效率和性能很重要,使用protocolbuffers的解析器可能是个较好的选择。
The Buffer stage has four independent buffers, two per channel with a great drive capability & current handling.
缓冲区的阶段有四个独立的缓冲区,每一个伟大的驱动器的电流处理能力和渠道两个。
As one banker ominously puts it: "you are getting further along the train tracks towards the buffers. "
正如一位银行家所做的不祥比喻:“你正在向铁轨慢慢靠近”。
Value is zero, then there is no upper limit to the number of buffers that can be in a small buffer pool.
值为零,则可以位于小缓冲池中的缓冲区数没有上限。
Emacs now displays the source code of the main routine, together with the GUD, locals, breakpoint and stack buffers, in a single frame.
Emacs会将主程序段的源代码以及GUD、本地变量、断点和栈的buffer在一个frame中。
If you are managing your own buffered graphics, you will need to be able to create and render graphics buffers.
若要管理自己的缓冲图形,需要能够创建图形缓冲区并呈现其内容。
The min parameter specifies the minimum number of memory buffers that must be maintained in the pool of small memory buffers.
min参数指定在小内存缓冲区的池中必须维护的最小内存缓冲区数。
As the number of request blocks goes up, the number of FCM buffers (fcm_num_buffers) goes up.
而当请求块的数目增加时,FCM缓冲区的数目(fcm_num_buffers)也会增加。
For the actual buffer processing, the function is perfectly capable of handling zero-sized buffers by simply returning.
对于实际的缓冲区处理,函数只需直接返回,就能够很好地处理大小为零的缓冲区。